Monday, December 10, 2012

The African Origin of Robotics


http://www.lulu.com/content/paperback-book/khnum-ptah-to-computer-the-african-initialization-of-computer-science/13474996
The African Origin of Robotics can be traced back to Pre-dynastic Ancient Nile Valley culture.  The body of a deceased person would be cremated and the ashes would be used to make a statue.  The statue was then "animated" or "brought to life" in a ritualistic ceremony called the "Opening of the Mouth Ceremony".  The practice of creating and animating or "bringing to life" statues as part of traditional African Animist culture spread throughout the African continent and also spread to the rest of the World.
In Traditional African Animist culture, these statues are created to house energies and perform certain tasks, which is synonymous to Robotics.  There African Robots have been called by a Variety of names including: "Magic Idols", Juju, Fetishes, Talisman, Voodoo Dolls, Hoodoo Poppets, N'Kisi, Obo, Obia, Ouangas, and Abosam just to name a few...

The deity KHNUM, also known as Khonvoum to the Bambuti people of Central Africa, is an African Creation deity of Robotics.
The African Animist tradition of Robotics has inspired new manifestations of the craft of African Robotics in fact and fiction.

For more information, check out the book "Khnum-Ptah to Computer: The African Initialization of Computer Science" available at http://africancreationenergy.com

This is part of the History of Robotics. These are the concepts which led to the development of modern Robotics, and Africa is indeed a part of that History. If we can study the History of Robotics, and Asian cultures can discuss their mythology and history with King Mu of Zhou, and European cultures can discuss their mythology and history with Talos, Pygmalion and Hero of Alexandria, then people of African descent should be able to discusses the History of Robotics by tying in African culture and mythology

Khnum-Ptah to Computer: The African Initialization of Computer Science

 
"Khnum-Ptah to Computer: The African Initialization of Computer Science" presents a comparative analysis between a variety of concepts, customs, cosmologies, and practices found in African Cultures to topics related to the field of Computer Science. The African origin of Binary Code, Logic, Computers, Programming, Robotics, Cyborgs, Androids, Virtual Reality, and Transhumanism are examined using Sound Right Reason to show a relationship between two dichotomies that have more in common than what meets the eye.

Chapters/Topics:
Initialization
Logic in Africa
Artificial Intelligence in Africa
Binary Code in Africa
Semiconductors in Africa
Computers in Africa
Robots in Africa
Cyborgs in Africa
Virtual Reality in Africa
Transhumanism in Africa
Rise of the Nubots: An Afrofuturistic Story
How to Create an AfroBot
About the Author / Programmer

194 pages

"Khnum-Ptah to Computer: The African Initialization of Computer Science"
ISBN 978-1-300-49891-9
by African Creation Energy
African Creation Energy
African Creation Energy

Saturday, November 17, 2012

Teenager from Sierra Leone West Africa is Self-Taught Electronics Inventor


15-Year-Old Kelvin Doe is an engineering whiz living in Sierra Leone who scours the trash bins for spare parts, which he uses to build batteries, generators and transmitters. Completely self-taught, Kelvin has created his own radio station where he broadcasts news and plays music under the moniker, DJ Focus.

Kelvin became the youngest person in history to be invited to the "Visiting Practitioner's Program" at MIT. THNKR had exclusive access to Kelvin and his life-changing journey - experiencing the US for the first time, exploring incredible opportunities, contending with homesickness, and mapping out his future.

Check-out David's Crowdrise page: http://www.crowdrise.com/InnovateSalone

Photos courtesy of Adam Cohn (http://www.adamcohn.com/) and Paula Aguilera


Breaking the Spell of Technophobia


Technophobia is the fear or dislike of advanced technology, and complex devices, especially computers.  This episode shows that we as AFRICAN people are indeed Creators, Fashioners, and Makers of Technology and we have a place as the Developers, Programmers, and Designers of the Programs, Robotics, Artificial Intelligence, and Computers that will shape the Highly Technical Advanced Future.

Binary Code is African; The Odus of Ifa are an example of Binary Code; The Drum is an example of Binary Code; "Computer Programming" means "With Ptah before the word"; Cybernetics - the etymological meaning is "the art of governing" - Establishing ORDER or MA'AT; African Statues are built to House Energies just like Robots and Androids; Akuaba are Fertility Statues; Ogun and Nana Adade Kofi are the real "Iron Men" blacksmith African Energies; Hieroglyphics and Griot stories are examples of Virtual Reality; The origin of Technophobia and Techno-Fear-Mongering has its origins with the Religion vs. Science, Vatican Church vs. Illuminati, and Creationism vs. Evolution debates; Technology has already altered DNA; No Human being has been infected by a Computer Virus to date but there has been an Implant in a Human that was infected by a computer virus;  John Henry Thompson comes from an Afro-Centric family and invented the Lingo Computer Programming Language; Philip Emeagwali is a Nigerian African Computer Scientist who developed a super-computer; Herman Chinery-Hesse is a Pan-Africanist from Ghana who is the founder of the SOFTtribe company and considered the father of the African Industrial Revolution

The Ontology of Virtual Reality and Artificial Intelligence:
http://www.youtube.com/watch?v=TO5t98V6VP4

Saturday, October 27, 2012

Anansi Operating System developed by Raindolf Owusu

http://www.anansios.oasiswebsoft.com/
source:  http://www.thehabarinetwork.com/ghanas-raindolf-owusu-builds-computer-operating-system-relevant-africa-anansi
Raindolf Owusu has designed, built and launched a computer operating system relevant to Africa. The operating system is known as the Anansi Operating System.  Anansi is a simple unique GNOME clone operating system developed on top of the linux kernel which re-defines the linux desktop user experience.  Anansi is embedded with all the basic software and system wares that will enhance connectivity.  Although Anansi was originally developed first for 32-bit x86-based computers, it is now easily portable to most general-purpose 32- or 64-bit architectures. It is a cross platform.  Oasis Websoft has a developer Kit for any developer who wants to help with this open SuSe/Gnome project.  Owusu, a 21 year old second year student of Methodist University College in Ghana, studying Information Technology founded and runs Oasis Websoft.  He spent over a year designing Anansi which is based on the Open Source Coding and can be modified by other developers to be better in its nature. Anansi is now available for download at the Oasis Websoft website.


Bertin Nahum - African Robotics Pioneer

Bertin Nahum holds a Master of Science degree in robotics from the University of Coventry and is a native of Benin West Africa.  In 2010, Bertin Nahum created ROSA, a robot that helps surgeons performs brain surgery. The ROSA robot is used in hospitals around the world.  Bertin Nahum is the 4th most revolutionary high-tech entrepreneur in the world after Steve Jobs, Mark Zuckerberg and James Cameron.  Bertin Nahum is CEO of Medtech, a French company which specializes in robotic surgical assistance which helps guide surgeons, doctors, and biologists during biopsies, implants, and surgeries.



Sunday, September 16, 2012

Way-C tablet and Elikia smartphone - Africa’s answer to the iPad and iPhone


Source: http://www.howwemadeitinafrica.com/interview-the-man-behind-africa%E2%80%99s-answer-to-the-ipad-and-iphone/20202/

VĂ©rone Mankou is the 26 year old entrepreneur behind the African designed Way-C tablet computer. The tablet was launched earlier this year and attracted significant media attention. Mankou’s company VMK, which is based in the Republic of the Congo, this month also unveiled its first smartphone. "How we made it in Africa" asked Mankou about the business and how his company competes with the likes of Apple and Samsung.

Why did VMK decide to launch the Way-C tablet?

The project began in 2006. I was working at an internet service provider (ISP) and wanted to design a cheap computer to give access to internet for more people. After one year, when Steve jobs unveiled the first iPhone, I changed my plan and the project became the “big iPhone”, meaning a tablet.

Earlier this month VMK also introduced its first smartphone, just days before the launch of the iPhone 5. Why enter the smartphone market?

You know, when I was working on the tablet, I noticed that the biggest difference between a tablet and a smartphone is the screen size. After we launched the tablet we decided to work on a smartphone project, and now the project is finished. It’s a Android phone called the Elikia (which means “hope”).

Your products are designed in Africa, but assembled in China. Tell us a bit more about the design and manufacturing process.

You know it’s like building a house. Firstly you have an architect who draws the house and after you have the workers who will build that house using the plans of the architect, but the architect need to be there every time to check if everything is okay. And for the designing of a tech product, it’s the same.

You mentioned in a previous interview that you will roll out 3G enabled tablets.

The first version of the tablet was Wi-Fi only, and many people didn’t like this. They asked us to develop a 3G tablet, so now we are working on a 3G tablet that we will launch in the beginning of next year.

How do you compete with multinational tablet manufacturers such as Apple and Samsung?

For me Apple and Samsung are not interesting in Africa, because their cost is so high. My goal is to put a tablet in the hands of all Africans, their goal is just to make money. It’s different.

VMK has also launched a market place for African-focused apps. Tell us more about this.

I noticed that in Android Market, now called Play Store, more than 99% of apps are not developed in Africa and/or are not developed for Africa. When you search African content, it’s hard to find good ones. We decided to launch our own marketplace to help us promote African content. And for the smartphone Elikia we decided to launch a new version of our market, called VMK Market, with the possibility to buy apps via our gift card, called VMK Market Card. So now we are developing a real environment (including devices, content and monetisation) to help developers.

Describe some of the greatest challenges you are facing in making the Way-C a success.

Our biggest challenge is just to get funding, because it’s needed to produce more products and for marketing purposes.

What is needed for Africa to become a serious player in the tech industry?

Funding and innovation.

What does the future hold for VMK?

We decided to launch a tablet and smartphone. It’s done. Now I want to give all African households access to technology, and develop a new tablet for education priced at about US$100.


Tuesday, September 11, 2012

Make An Ancient Egyptian Sundial And Wall Clock


Learn How To Make An Ancient Egyptian Sundial And Wall Clock.


To Calibrate Your Clock You Will Need To Download This Table:


You will Also Need The Egyptian Sundial Face (download here):


24 Hour Clock Movements can be obtained here:
http://www.klockit.com/products/dept-379__sku-bbbii.html

Sunday, September 2, 2012

Antimatter Positrons in Banana, Yam, and Plantain



·  Potassium-40 is a naturally occurring isotope that is unstable and radioactively decays. 
·  The radioactive half-life of Potassium-40 is 3.938×1016 seconds.
·  The atomic mass of Potassium is 39.1 g/mol.    
·  When Potassium-40 radioactively decays, 1 in every 100,000 decays emits an Anti-Electron or Positron particle of Antimatter. 
·   For every 1,000,000 atoms of Natural Potassium, about 117 atoms are Potassium-40.
·  Therefore, substances dense with Potassium will likely contain Potassium-40 and will also occasionally emit Antimatter in the form of an Anti-Electron. 

Bananas are food that is rich with Potassium.  Let’s calculate the Anti-matter emitted by an Average Banana.
·         1 Average Banana contains 0.450 grams of Natural Potassium
= 0.450 g × (6.02×1023) atoms/mol ÷ 39.1 g/mol = 6.93×1021 atoms of Potassium
Remember that for every 1,000,000 atoms of Natural Potassium, about 117 atoms are Potassium-40.  So to find the number of atoms of Potassium-40 in our Potassium atoms we  
= (117 ÷ 1,000,000) × 6.93×1021 atoms = 8.11×1017 atoms of Potassium-40
To find out how many decays of Potassium-40 occur per second, we divide our total number of Potassium-40 atoms by the radioactive half-life of Potassium-40 which is 3.938×1016 seconds
= 8.11×1017 atoms of Potassium-40 ÷ 3.938×1016 seconds = 20.58 decays of Potassium-40 per second
·                  Now remembering that 1 in every 100,000 decays of Potassium-40 emits a Positron particle of Antimatter, then we can calculate how often a Positron particle of Antimatter is emitted from our banana by
= (100,000 decays ÷ 20.58 decays per sec.) ÷ 60 sec. per min.
= Every 81 minutes an Anti-Electron Antimatter particle is emitted from a Banana

Yam and Plantain are two foods common in African and Caribbean diets which are higher in Potassium content than Banana.  Let’s use the formulas provided to calculate how long it will take for the African Yam and Plantain to emit a Positron particle of Antimatter.

·         1 Average Plantain contains 0.534 grams of Natural Potassium
= 0.534 g × (6.02×1023) ÷ 39.1 = 8.22×1021 atoms of Potassium
= (117 ÷ 1,000,000) × 8.22×1021 = 9.62×1017 atoms of Potassium-40
= 9.62×1017 ÷ 3.938×1016 = 24.43 decays of Potassium-40 per second
= (100,000 decays ÷ 24.43 decays per sec.) ÷ 60 sec. per min.
= Every 68 minutes an Anti-Electron Antimatter particle is emitted from a Plantain

·         1 Average African Yam contains 0.694 grams of Natural Potassium
= 0.694 g × (6.02×1023) ÷ 39.1 = 10.7×1021 atoms of Potassium
= (117 ÷ 1,000,000) × 10.7×1021 = 12.5×1017 atoms of Potassium-40
= 12.5×1017 ÷ 3.938×1016 = 31.75 decays of Potassium-40 per second
= (100,000 decays ÷ 31.75 decays per sec.) ÷ 60 sec. per min.
= Every 53 minutes an Anti-Electron Antimatter particle is emitted from an African Yam
  
Jamaican sprinter Yohan Blake eats 16 Bananas per day. There are 1440 minutes in a day; therefore, Yohan Blake takes in about 18 Positron Antimatter particles per day just from eating Bananas. Perhaps the consumption of the Anti-matter found in Yam, Plantain, and Banana is what has led to the superior performance of Yohan Blake, Usain Bolt, and the other Jamaican sprinters in this year’s Olympic Games.  

For this and other African science experiments, be sure to check out the book “9Ether RE Engineering”, and for recipes on how to prepare African Yam and Plantain, be sure to check out the book “Back To Our Roots, Food for the Gods” both available at www.AfricanCreationEnergy.com
 

Sunday, August 5, 2012

African Automotive and African Aerospace Development

African Automotive
The Izuogu Z-600 was the brainchild of Nigerian engineer Ezekiel Izuogu and was the first automobile developed of indigenous all-African technology in 1997














African Aerospace
NigComSat-1 was a Nigerian communication satellite. The initial contract to build the satellite was signed in 2004. It became the first African geosynchronous communication satellite, when it was launched at 16:01 GMT on 13 May 2007.

Saturday, June 30, 2012

9 ETHER RE Engineering

http://www.lulu.com/content/paperback-book/9-ether-re-engineering/12931599
9 E.T.H.E.R. R.E. Engineering teaches the Science, Technology, and Practical Application of the Ancient Fundamental Element known as "Ether" through a synthesis of African Theology and modern Scientific Theories related to Electricity, Thermodynamics, Hydrodynamics, Electromagnetic Radiation, and Resonant Energy.
Nine Ether
9 Ether RE Engineering

Friday, June 22, 2012

African Mathematics Ma'at Techniques The Thoth Process

http://www.lulu.com/product/paperback/supreme-mathematic-african-maat-magic/12099169
http://www.amazon.com/Supreme-Mathematic-African-Maat-Magic/dp/0557592143

The African Origin of Mathematics, an excerpt from the book "Supreme Mathematic, African Ma'at Magic". Presented by African Creation Energy.


Ever since it was first posted in February 2010, there has been much criticism about this video and the information presented.  After 2 and a half years, 50000 views, and hundreds of "likes" and comments, the video above entitled "African Mathematics Ma'at Techniques The Thoth Process" was flagged by the YouTube community on June 21, 2012 as inappropriate and removed from YouTube.  Currently, the previous link to the video says "This video has been removed as a violation of YouTube's policy against spam, scams, and commercially deceptive content."  There is no spam, no scam, and nothing commercially deceptive about this video, and it is unfortunate that a video about a book discussing the African Origin of Mathematics was deleted.

Tuesday, June 12, 2012

Nubian Arch, Nubian Domes, and Nubian Vaults - ARCH I TECT: How To Build A Pyramid


http://www.lulu.com/shop/osiadan-borebore-oboadee/arch-i-tect-how-to-build-a-pyramid/paperback/product-17266020.html
"ARCH I TECT: How To Build A Pyramid" (ISBN 978-1-105-06816-4) by Osiadan Borebore Oboadee is a step-by-step do-it-yourself handbook and guide which presents innovative techniques to design and build Nubian Arches, Nubian Vaults, and Nubian Domes. Detailed Construction Instructions are provided as the reader is taken on a journey into the Ancient African Architectural Art of Arch and Dome Building.

Wednesday, May 30, 2012

Mathology Mythematics 01 - Introduction and Algebra

The word "Myth" and the word "Math" both have etymological origins related to the "thought process".  There are many symbols found within African Mythology that can be used to help teach, explain, and comprehend Mathematical concepts.  This video is a basic introduction to "Mathology Mythematics" and its application in the subject of Algebra.

Sunday, February 26, 2012

What Happens Between the Tick and the Tock?


In order to know what happens between the tick and the tock, we must first discover what causes the tick and the tock. So, let us take a peak into the mechanics of time! The gears, circuitry, and components of clockwork are basically: An oscillator to provide a time-base, Two or more clock hands, An enumerated dial on the face of the clock, and, Gears to transfer the motion of the oscillator to the hands on the dial. In grand-father clocks, the oscillator is a swinging pendulum. In electronic clocks, the oscillator is a "Quartz Crystal." In electronic clocks, electrons flowing from the battery electrify the quartz crystal. When the quartz crystal is electrified, it begins to "Vibrate or Oscillate" due to one of its properties called the "piezoelectric effect." A counter counts the vibrations of the quartz crystal, and then alternates the output to a solenoid coil. As the polarity of the solenoid changes, it causes a small round magnet to rotate. As the magnet rotates, it causes a "Tick," "Tock" sound, and the gears of the clock transfer the motion of the rotating magnet to the hands of the clock. So, what happens between the tick and the tock of time is movement and vibration! On the large scale, the movement and vibration of the pendulum swinging occurs between the tick and the tock on Grandfather clocks. And on the sub-atomic scale, the movement and flow of electrons which cause the oscillation and vibration of a quartz crystal happens between the tick and the tock in electronic clocks. Because the electron is a Fundamental particle of Nature, the movement of this sub-atomic particle is "The First" movement on which the Second of time is based. For more information, check out the book, "The Science of Sciences and The Science in Sciences" available at www.AfricanCreationEnergy.com.

Friday, February 24, 2012

Belief in Extraterrestrials motivates African Astrophysicists and Astronauts

Africans who Believe in Extraterrestrials become Astrophysicists and Astronauts. The belief in Extraterrestrials is prevalent throughout traditional African cosmology and theology and can motivate Africans as operative Astrophysicists and Astronauts.

Sunday, February 19, 2012

Albert Einstein, Egyptian Mysteries, and Relativity E=mc²


Around 5000 years ago in Ancient Egypt, the cosmology and theology in a city called Heliopolis or Annu stated that:
In the beginning there was only the "dark water" called Nu, symbolic of inert nothingness, and chaos. Out of the dark waters of Nu there arose a "Primordial Mound" or Hill called the "BenBen Stone". On top of the Primordial Stone stood a deity named Atum who proceeded to create the rest of the world.

The Primordial Mound was symbolized in Egyptian Architecture through the construction of Obelisks and Pyramids. The Primordial Mound was personified in mythology as the deity Ta-Nun who was symbolic of "matter" or "Earth." The deity Atum was associated with "the Sun", light, and creative energy. Atum was considered a "son of Ptah" who created Atum through the symbolic vibration of "speech". This ancient African cosmological story used mythology to depict the relativistic relationship between Energy or "light" symbolized by Atum, and "matter" symbolized by the Primordial mound or BenBen stone.

Now let's fast forward to the year 1905. A scientist by the name of Albert Einstein proposes a relationship between mass and energy in a paper entitled "Does the Inertia of a Mass depend on its Energy content?" The relationship expressed in this paper would go on to become known as the famous equation E=mc2, and would eventually revolutionize the field of Science and Physics.

So what is the connection between Albert Einstein's Theory of Relativity equation E=mc2 and the Ancient Egyptian Theology of Atum or "Energy" standing on a Stone or "matter"?

Well, besides the fact that both Albert Einstein's Theory and the Heliopolis Theology both describe a relativistic relationship between matter and energy...the name "Albert Einstein" actually expresses the events described in the story of Atum standing on the Primordial Mound.
In the German language, the name "Albert" means bright or Light and "Einstein" means "On Stone". Thus, the name "Albert Einstein" literally means "Light On a Stone which is exactly what is symbolically depicted in the Ancient African story of Atum (or Light) standing on the Benben Stone.

So it seems that not only History, but also Theology and Theory repeat themselves...

Tuesday, February 7, 2012

Jesus found in Technology. Technology and the 2nd Coming of Christ. Hu is your Savior


http://www.youtube.com/watch?v=UuzQvGt3sfM
A portion of the seminar from the "Word Power Black Literature Festival" at Centerprise Bookstore from October 15, 2011, Osiadan Borebore Oboadee discusses the relationship between the concept of Jesus Christ in Theology to Technology and the Science of Religion.

Science "The Father", Technology "The Son", Mathematics "The Holy Spirit",
and the Blessed Mother Creativity.

In the Bible, Jesus is called a "Tekton" which has the same etymological root of the word "TECHNOLOGY"

Mark 6:3 - "Isn't this the TEKTON (carpenter ), the son of Mary..."
* Strong's Concordance number G5045 - tekton

* Both Jesus and Technology resurrect the dead.
* Both Jesus and Technology heal the sick
* Both Jesus and Technology can walk on water
* Both Jesus and Technology can turn water into wine
* Both Jesus and Technology can give you everlasting life

http://africancreationenergy.com/

Monday, February 6, 2012

The 25 Most Important Black Tech Pioneers from www.complex.com

Source: http://www.complex.com










25. Benjamin Banneker

Notable invention: The U.S. wooden clock



The son of a slave, Banneker developed a fascination for repairing watches by taking them apart and studying their components. After mastering his craft he would go on to build America's first-ever wooden clock using carved wooden pieces. The clock worked for more than 40 years. Banneker banked on his nationwide exposure and started up his own watch and clock repair business. They don't make them like they use to.








24. Ronald S. Demon (1977–present)

Notable invention: The Smart Shoe



Inventor and CEO of VectraSense Technologies patented a sports shoe geared towards athletes and nicknamed it the "Smart Shoe". This high-tech footwear sensed a person's movement and automatically adjusted cushions in the shoe to provide better comfort. Nike's either going to buy this technology or build a better version.







Notable invention: The Power Drencher a.k.a. the Super Soaker



The Super Soaker wasn't exactly what we would call groundbreaking, but it was definitely one of the most innovative novelties created during the early 1990s. Lonnie Johnson’s plastic water cannon had kids and grown-ups drenching each other silly with H20 on every front lawn and playground across the nation, raking in more than 1 billion in sales and cementing its place in pop culture as one of the most beloved toys of our generation.








22. Benjamin Bradley (1830–unknown)

Notable invention: Warship steam engine



Having worked at the Annapolis Naval Academy, Bradley performed scientific experiments and was credited for building a steam engine at the age of 16. It was made entirely from scrap metal and used on warships to help travel faster at sea. Though he wasn’t able to patent his work, he sold his idea in exchange for his freedom.







21. Norbert Rillieux (1806-1894)

Notable invention: Multiple-effect evaporator



This American engineer revolutionized the sugar industry with the multiple-effect evaporator, a device that produced high-quality sugar and reduced production costs by using steam efficiently to evaporate water and prevetn sugar from burning or being discolored. After patenting his creation in 1843, sugar manufacturers from Cuba to Egypt requested Rillieux’s machine. It’s still used today to make glue, soap, milk, and other products. Sweet.








20. Andrew Jackson Beard (1849 – 1921)

Notable invention: The Jenny Coupler



Before the Jenny Coupler, railroad cars were manually joined together. As one of the many railroad workers who lost a limb (his leg) in a coupling accident, Beard saved many lives with his invention, which automatically locked two car-bumps together. He patented the device in 1897, the same year Congress created the Federal Safety Appliance Act, a law that made it illegal to operate railroad cars without automatic couplers. Not bad for a man with little to no education in engineering.







19. Lewis Howard Latimer (1848–1928)

Notable invention: Water closet




Before serving as Thomas Edison's original draftsman and sketching invention plans for Alexander Graham Bell, Latimer was best known for improving the railroad toilet system with the water closet. For those brand new to 18th and 19th century jargon, it's a flush toilet. He would also create a method to make carbon filaments for the electric lamp and become the only African American member of the engineering division at the Edison Company. Makes you wonder if Edison stole borrowed any ideas from him.







18. Meredith Gourdine (1929–1998)

Notable inventions: The Incineraid system, Focus Flow Heat Sink, and industrial paint spray



Gourdine has been praised as a pioneer researcher and for creating electrogasdynamics—the generation of electrical energy from the conversion of the kinetic energy contained in a high-pressure, ionized, moving combustion gas. His most popular creation, the Incineraid system, was used to banish smoke from burning buildings and fog from airport runways. Adding to his legacy, he would also create the Focus Flow Heat Sink, a device that cooled down computer chips.







17. Jan Ernst Matzeliger (1852 – 1889)


Notable invention: The shoe-lasting machine



Half Dutch, half Surinamese, Matzeliger crafted a machine to help expedite the final step of shoemaking—connecting the leather from the upper shoe to the inner sole. The device helped ensure better quality and fit, and increased shoemaking speed by up to 900 percent. Remember him the next timey you throw down over $300 on a pair of kicks.







16. Garrett Morgan (1877–1963)

Notable inventions: Three-way traffic signal, hair straightener



After witnessing a traffic collision, Morgan decided to build a non-electric three-way traffic signal that featured Stop, Go, and all-directional stop positions. He would create another safety-inspired device, the gas mask, which he used to save 32 men trapped during an explosion in an underground tunnel in Lake Erie. The man even invented the first human-hair straighetner and sold it under the name G.A. Morgan Hair Refining Cream.








15. Granville T. Woods (1856–1910)

Notable inventions: Telegraphony, trolley conducting system, third brake, and improved air brake



The self-taught inventor managed to combine the telephone and telegraph to form the telegraphony, a system used to send voice and telegraph messages over a single wire. His other most notable invention was a detection system that informed train engineers of how close their trains were to collision. He also received credit from a few historians for inventing the third rail, which Thomas Edison was awarded a patent for 10 years earlier in 1882. Now we know why they referred to him as the “Black Edison.”







14. David N. Crosthwait, Jr. (1898-1976)

Notable inventions: Heating systems for huge buildings, vacuum pump, automobile turn signal, and thermostat control



An expert in central air conditioning and heat ventilation systems, Crosthwait took his knowledge of electrical engineering and built everything from vacuum pumps to temperature regulating devices. He would go on to accomplish one of the biggest feats of any 20th century inventor—creating the heating systems for Rockefeller Center and Radio City Music Hall. Someone was in an empire state of mind.








13. Roscoe L. Koontz (1922–present)

Notable inventions: Collimator and pinhole gamma ray camera



This health physics specialist created the collimator, a device used to align two or more devices and set toward at a proper focus. He also designed radiation activity measuring devices and automatic air and water sampling equipment.







12. Frederick McKinley Jones (1892–1961)

Notable inventions: Automatic refrigerator system, military air-conditioning unit, self-start gas engine, and movie projector devices




Jones designed portable cooling units for trucks, trains, ships, and aircrafts to help store and keep products chilled. His invention would play a vital role during World War II, where army hospitals and battlefield infantries preserved blood, food, and medicine in these small-scaled refrigerators. With over 61 patents under his belt, he was definitely a jack-of-all-trades inventor.







11. Alexander Miles (1838 – 1905)

Notable invention: Automated elevator door system



During a time when many people died falling down elevator shafts, Alexander Miles made significant upgrades to the electric lift by introducing automated doors and improving the open/close mechanism for elevator shafts. Miles would go on to create an insurance agency devoted to serving blacks who were discriminated upon and would be inducted into the National Inventors Hall of Fame in 2007. Thanks for saving us the walk-up.







10. Otis Boykin (1920-1982)


Notable inventions: Electrical resistor, variable resistor, control unit for heart stimulators, burglar-proof cash register, and chemical air filter



Inventor of over 25 electronic devices, Boykin’s biggest contribution to the tech field would be the control unit for the artificial heart pacemaker, which used electrical impulses to maintain a steady heartbeat rate. Other big accomplishments would include the creation of the variable resistor (used in guided missiles) and the improved electrical resistor used in computers, radios, and TVs.







9. Henry Blair (1807–1860)

Notable inventions: Seed planter and cotton planter



Very little is known about Henry Blair’s background, but we do know that he invented the seed planter, a machine that allowed farmers to plant corn faster with less work. It’s also been documented that he was the second black inventor to ever be rewarded a patent for his work and was the only inventor to be identified as “a colored man” according to Patent Office records. Blair signed each patent by marking an “x” as his signature because he couldn’t write.








8. Richard Spikes (1884–1962)

Notable inventions: Railroad semaphore, multiple barrel machine gun, beer-keg tap, self-locking rack for billiard cues, automobile directional signals, automatic gear shift, and automatic car washer



Is there anything this guy didn't invent? The San Francisco native is most famous for developing a turn signal system for vehicles, but was never awarded a patent for it. Percy Douglas-Hamilton was bestowed the honor in 1907. Spikes might of gotten the better end of the stick, as his transmission and gear-shifting designs helped him score over $100,000 during the 1930s. Dedicated to his work, Spikes worked on the automatic safety brake until he went blind and died in 1962.







7. Elijah McCoy (1844–1929)

Notable invention: Lubricating cup



Having worked as an oilman on a steam engine locomotive, McCoy combined his education and work experience to create a lubrication system that greased up engines and machines without having to shut them down. This would help reduce transportation times for all steam engine-based trains. As the story goes, his invention was so good, railroad engineers, trying to avoid shotty products, would ask if locomotives were outfitted with "the real McCoy". In addition to the lubricating cup, McCoy also held 57 patents.








6. John Henry Thompson (1959-present)

Notable inventions: Lingo programming and XObjects



Known as the “Father of Lingo Programming", Thompson developed the popular scripting language to help render visuals in computer programs. Lingo’s also been used to create flash and shockwave programs found in animation, web design, and video games. Programmers might recognize the object-oriented programming language embedded into Macromedia Director and other popular Adobe programs. Adobe-philes owe this man a great gratitude of respect.







5. Kenneth J. Dunkley (Unknown)

Notable inventions: 3D glasses




Who ever guessed the inventor of 3D glasses was a black man? We didn’t. Dunkley’s technique of blocking two points of a person’s peripheral vision resulted in people viewing images in the third-dimension. He would also be a recognized as a staple in holography—the process of making holograms. This man was so ahead of his time.







4. Henry Sampson (1934-present)

Notable inventions: Gamma-electric cell, binder system, and case-bounding system for propellants



Sampson’s gamma-electrical cell made it possible to wirelessly send and receive audio signals through radio waves. The nuclear physicist bears patents for inventions related to solid rocket motors as well. His accomplishments served as a vital component to the growth of cellular phone usage. Somebody send this man a text to show him we appreciate is work.







3. George R. Carruthers (1939–present)


Notable inventions: Image converter, ultraviolet camera, and spectrograph



South Side, Chicago native and ultraviolet astronomy pioneer George Carruthers began showing signs of greatness at the age of 10, when he crafted his own telescope for a school science fair. Fast forward to 1972, his spectrograph invention would be used in the Apollo 16 mission to record radiation from the upper half of the ultraviolet spectrum on the Moon. The camera would also produce over 200 photos of the Earth’s outer atmosphere and other deep-space objects like nebulas and comets. Astronomical.







2. James Edward West (1931 - Present)

Notable invention: Electroacoustic Transducer Electret Microphone



Looking to improve the microphone, James West built a more compact and cost efficient version of the mic by placing polymer electret film on one side, resulting in the conversion of sound into high fidelity electrical signals. His invention has been used across the world and can be found in most telephones and tape recorders till this day. West carries over 200 foreign and 47 U.S. patents based around microphones and techniques involving the making of polymer foil-electrets. He now puts in work at John Hopkins University as a research professor.








1. Mark Dean (1957–present)

Notable inventions: ISA systems bus and 1GHz RISC processor chip



Tennessee-bred engineer, Mark Dean, designed the Industry Standard Architecture systems bus, a component that enables several machines like printers and modems to connect with a computer. Dean didn't stop there. He would also lead the design team behind the creation of the 1GHz RISC processor chip. Having occupied several big positions at IBM, he would become the first ever African-American to join IBM Fellow, which is the highest honor any scientist, engineer, or programmer can achieve at the company.

Sunday, February 5, 2012

Imhotep the African Architect Invented and Designed the Pyramid

Imhotep is the name of the first Architect in history that we know by name.  Imhotep was a remarkable African Scientist, Mathematician, Engineer, Architect, and Physician.  Imhotep invented the first Pyramid, the step-pyramid for the ruler named Djoser around 3000 BC.  The video below is short animation of Imhotep based on the images from statues carved of Imhotep during his time.  Imhotep discusses the Science and Art of pyramid building as various pyramids throughout time are displayed in the background.  Voice over audio is from Manly P Hall's "Initiation of the Pyramid" and music audio is from Kabaka Pyramid's "Be Wise".
http://www.youtube.com/watch?v=Bxj4BcYcWvQ